Operating temperature: -180 to +260℃
Corrosion resistance: strong acid and alkali, water and various organic solvents
Self lubricity: friction coefficient 0.04, smaller in plastics
Insulation: very good, dielectric strength 10KV
Tensile strength: 21 to 28MPA
Shore hardness: D50 to 55
Water absorption: <0.03
It also includes non-adhesion, non-toxic, non-flammable, oxidation resistance, atmospheric aging resistance and other characteristics.
Characteristics:
suitable for -180℃ - +260℃ temperature, in a variety of corrosive media work in the gasket, sealing and lubricating materials, but also made in a variety of frequency use of electrical insulation other parts.
Application:
Mainly used as electrical insulation materials and contact with corrosive medium lining, supporting sliding block, track seals and lubricating materials, widely used in chemical, pharmaceutical, dye industry container, storage tank, reactor reactor, large pipeline anti-corrosion lining material; Machinery, construction, transportation bridge slide block, guide rail; Anti - stick materials for printing and dyeing, light industry and textile industry.
Product specifications:
Length and width: arbitrary cutting (arbitrary custom, to map processing)
Thickness (mm) : 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0, 15.0, 20.0, 25.0, 30.0, 35.0, 40.0, 45.0, 50.0, 60.0, 65.0, 70.0, 80 .0, 90.0, 100.0. (Irregular thickness can be finished)
Product specifications:
Length and width: arbitrary cutting (arbitrary custom, to map processing)
Thickness (mm) : 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0, 15.0, 20.0, 25.0, 30.0, 35.0, 40.0, 45.0, 50.0, 60.0, 65.0, 70.0, 80 .0, 90.0, 100.0. (Irregular thickness can be finished)
Performance parameter
Product name: polytetrafluoroethylene rod /PTFE rod
Use temperature: -180~ + 260pm
Corrosion resistance: strong acid, alkaline, water and various organic solvents
Shao's hardness: d50~ 55
Insulation: very good, dielectric strength 10kv/mm
Water absorption rate: <0.03
Self-lubrication: friction coefficient 0.04, smaller in plastic
Tensile strength: 21~ 28mpa
Other features such as non-contamination, non-toxic, non-combustible, antioxidant and air resistance.
SPECIFICATION
Width: 20~300mm (conventional width 100mm, customizable)
Thickness: 0.03, 0.04, 0.05, 0.06, 0.08, 0.1, 0.2, 0.3mm
PTFE PERFORMANCE PARAMETER
METRIC | ||||
PROJECT NAME | UNIT | DIRECTIONAL FILM | SEMI-DIRECTIONAL MEMBRANE | UNDIRECTED MEMBRANE |
Tensile Strength | MPA | ≥30 | ≥20 | ≥10 |
Elongation At Break | % | ≥30 | ≥60 | ≥100 |
Insertion Loss | — | 3.0 x 10-4 | — | one |
Corner Positive Cut Value | — | 2.5x10-4 | — | — |
1MHZ Dielectric Constant | — | 1.8-2.2 | — | — |
Dc breaks Through The Voltage | MV/M | average value 200 low 40 | average value 60 low 6 | average value 30 |
TECHNICAL PARAMETER
PROJECT NAME | UNIT | DESIRED VALUE |
PERFORMANCE DENSITY | g/cm3 | 2.1-2.3 |
TENSILE STRENGTH | MPA | ≥14.0 |
FAULT STRETCH RATE | % | ≥150 |
Learn about the performance profile of rubber Products # Rubber # AOCHEN
Read MoreIf you need cloth insertion rubber sheet, please feel free to contact Aochen at www.aochengrass.com
Read MoreCopyright © Renqiu Aochen International Co., Ltd. All Rights Reserved